ParkZone Mini Vapor RTF Instruction Manual download pdf (Page 12)

12

EN

Motor Service

CAUTION: DO NOT handle propeller parts

while the ﬂ ight battery is connected. Personal

injury could result.

Disassembly

1. Disconnect the battery from the

ESC/receiver.

2. Hold the spur gear and turn the propeller

counterclockwise (looking from the front of

the model) to remove. Turn the propeller

clockwise to install. Make sure the propeller

size numbers (125 x 39) face away from the

motor (see illustration).

3. Hold the nut on the end of the prop

shaft using needle-nose pliers or

hemostats.

4. Turn the gear on the shaft clockwise (looking

from front of model) to remove the nut.

5. Gently pull the shaft (A) from the

gearbox (B) and make sure the washer (C)

and two bushings (D) are not lost.

6. Disconnect the motor from the ESC/

receiver.

7. Gently push the motor out of the gearbox

and remove the motor.

NOTICE: DO NOT remove the gearbox from

the aircraft. Damage to the aircraft will result.

Assembly

Assemble the aircraft using the instructions

above in reverse order.

• Correctly align the prop shaft gear with the

pinion gear on the motor.

• Correctly connect the motor to the

ESC/receiver so that the powered motor

turns the propeller clockwise (looking from

the front of the model).

Remove

Install

A

D

B

C

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Comments to this Manuals

No comments