ParkZone F-27Q Stryker Instruction Manual download pdf (Page 7)

Install included battery in the fuselage using the hook and loop straps.

Center of Gravity (CG)

140mm

(5.5 inches) forward from

ﬁ rewall on end of fuselage

Tip: Turn the clevis clockwise or counterclockwise on the linkage.

• Pull the tube from the clevis to the linkage.

• Carefully spread the clevis and put the clevis pin in a selected hole in the

control horn.

• Move the tube to hold the clevis on the control horn.

After binding a transmitter to model receiver, set trims and sub-trims to 0,

then adjust clevises to center control surfaces.

Fly the model at factory settings before making changes. For pilots who wish

to ﬂ y model for unlimited aerobatics, adjust position of linkages on servo arms

and control horns for increased travel.

Ailerons

Arms

Rudders

Horns

Ailerons Rudders

Installing Clevises on Control Horns and Control Centering

Factory Settings

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

No comments

ParkZone F-27Q Stryker Instruction Manual Page 7